This project is a serial IO / breakout daughter-board for the Rasberry Pi that includes a 7-30v wide range power supply, RS-232 compliant interface and 6 GPIO signal pins with optional 5v level shifter.

Features

  • Daughter-board format which sits directly on the Raspberry Pi pin header without requiring a ribbon cable,
  • Includes switch mode power supply with input voltage range of 7v to 30v which provides power to the Pi without requiring the USB power be connected,
  • Choice of barrel connector or terminal block for power connection
  • Provides RS232 serial output using MAX3223 level shifter
  • Provides six GPIO pins, either straight 3.3v pass-through from the Pi, or converted to 5v using MAX13000 level shifter (level must be chosen at build time)

Files

The project was built using the gEDA suite, including gschem and pcb. The files below are for those programs.

Status

Version 1.0 of the board has been manufactured and is currently being shipped back to us.

Licence

The Raspberry Pi Serial IO Board is licenced under the CERN Open Hardware Licence v1.1

Attachments

Board Render
Share Link
https://vk3go.com/p/piserial
Status
Completed
Created
24 Jan 2013